Control Panel

This is the main control panel. leave here the control connections of turnouts and turntable. They are also received the information of the blocks, occupation. Thus the signalers are triggered as needed. There are 3 Arduino control, one for turnouts, another for signs and IR sensors, and another for internet network, and a modem DCC / Serial (Arduino home made) to receive the rails command the handset. I use Digitrax 8A booster. A quadruple auto-reverse and the source complete the picture.

Application

This is a application I made to control turnouts by computer. All turnouts are DCC and there is a USB inteface.

The Plan

This is all track plan of my layout.

Turntable

The Ten-wheeler is over the manual turntable.

In fact it is a DCC turntable with a steep-motor and Arduino control with Infra-red position index.

The Helix

The locomotive is between tunnels, on the helix, down the mountain.

Men Working

The Ten-wheeler is leave the tunnel and the men is working on tracks.

Ponds

Two tunnels and a small pond, the wind knocked down the palm trees.

The model

This will be a whole room model. Today it was built in half so I can take all faults before starting the other half.